Featured
Easy Fly Stitch Tutorial
Easy Little Fly Stitch
🖤 This basic embroidery stitch, the fly stitch, is perfect for creating flying birds, leaves, closed and open fills, and simple design elements. It’s quick and easy so let’s learn!
The fly stitch is a cute little ‘V’ shaped stitch, almost similar to the fishbone stitch, but it’s a bit more adorable, in my opinion. It also uses less thread. It’s simply a little open loop that’s been stitched down at the bottom.
You can make little flying birds, arrows, design elements, leaves, feathers, and so on. Let your imagination run! I'm going to show you the basic fly stitch, then give you some examples of how you can change them up a bit. I’ll also create a leaf with this stitch and compare it to a leaf made with the fishbone stitch so you can see the difference.
Table of Contents
Step-By-Step Fly Stitch
- Simply start by creating a loose seed stitch going from A to B.
- Imagine the letter ‘V’ and where the bottom of that ‘V’ would be, and come up halfway (C), above your thread.
- Pull the thread gently on the back so it hugs the needle on the front to form a nice ‘V’. This step is optional but it helps reduce wear and tear on the thread.
- Then pull your needle through.
- To tie the 'V' down with a small stitch return to the back of the fabric on the other side of the thread, at or near C.
Grouping & Stacking the Fly Stitch
Let's play with our stitch a bit. It can certainly be used as a stand alone stitch (maybe you want to make a little cat nose), and it can also be used grouped to create different effects.
A few random stitches can make a lovely open fill or it could become 3 flying birds.
They can also be stacked with or without any space in between each other. The stitch that holds the bottom of the fly stitch down can also vary from short to long to form a ‘Y’.
Fly Stitch Leaf
Draw a leaf template and create a stitch (A to B) along the top center. This isn’t a part of the fly stitch but it’s needed to add a little point to the leaf.
Directly up against it, add a fly stitch:
- Come up at C along the edge of the leaf, then down at D at the other edge of the leaf, leaving the thread a bit loose.
- Bring your needle to the top of your fabric at B and bring it over your loose thread.
- Then pull your needle all the way up through.
- Tie the stitch down by returning to the back just below B.
Continue to build more fly stitches, one below each other until your leaf is finished.
Fly Stitch vs Fishbone Stitch
On the left is the fly stitch leaf and on the right is the fishbone stitch leaf. The way they meet along the spine is where they differ. The fly stitch leaf has a defined ‘spine'-like’ appearance while the fishbone criss-crosses. Other than that, they’re quite similar to each other.
These two leaves are considered closed fills since they cover the fabric below. If you want to learn how to make open fill leaves I have a blog post for that using both the fly stitch and fishbone stitch, so take a peek!
Fly Stitch Video Tutorial
Now that we've gone over the fly stitch, I hope you'll incorporate it into your stitchery magic! And as always, here's a video tutorial below.
tags: fly stitch, leaf stitch, easy embroidery stitches, embroidery for beginners, stitch tutorial, embroidery tutorial